# Publications

## MFL Journal Papers

Author |
Title |
Journal |
Year |
---|---|---|---|

J. Kang, D. S. Wilkinson, M. Jain, J. D. Embury, A. J. Beaudoin, S. Kim, R. Mishra , and A. K. Sachdev | "On the Sequence of Inhomogeneous Deformation Processes Occurring During Tensile Deformation of Strip Cast AA5754 " | Acta Materialia, 54 , 209-218 | 2006 |

Q. Situ, M. Jain and M. Bruhis | "A Suitable Criterion for Precise Determination of Incipient Necking in Sheet Materials" | Materials Science Forum, Vol2 519-521, pp. 111-116 | 2006 |

D. R. Metzger, X. Duan, M. Jain, D. S. Wilkinson, R. Mishra, S. Kim and A. K. Sachdev | "The Influence of Particle Distribution and Volume Fraction on the Post-Necking Behaviour of Aluminium Alloys" | Mechanics of Materials, Vol. 38 , 1026-1038 | 2006 |

X. Duan, M. Jain and D. S. Wilkinson | "Development of a heterogeneous microstructurally based finite element model for the prediction of forming limit diagram of sheet metal" | Metallurgical and Materials Transactions A, Vol. 37A | 2006 |

E. Azhikannickal, M. Jain and M. Bruhis | "Test methods for the determination of the stress-strain behaviour of oriented polypropylene (OPP) tubes in uniaxial compression" | Polymer Testing (in press) | 2006 |

D. S. Wilkinson, X. Duan, J. Kang, M. Jain and J. D. Embury | "Modeling the Role of Microstructure on Shear Instability With Reference to the Formability of Aluminum Alloys" | Materials Science Forum, Vol2 519-521, pp. 183-190 | 2006 |

J. Kang, D.S. Wilkinson, D. V. Malakov, H. Halim, M. Jain, J. D. Embury, R.K. Mishra | "Effect of Processing Route on the Spatial Distributions of Constituent Particles and Their Role in the Fracture Process in AA5754 Alloy Sheet Materia | Submitted to Materials Science and Engineering A (submitted) | 2006 |

X. Duan, M. Jain, D. R. Metzger, D. S. Wilkinson | "A Unified Finite Element Approach for the Study of Post-Yielding Deformation Behavior of Formable Sheet Materials" | Journal of Pressure Vessel Technology (in press) | 2006 |

P. D. Wu, A. Graf, S. R. MacEwen, D. J. Lloyd, M. Jain and K. W. Neale | "On Forming Limit Stress Diagram Analysis" | Inter. J. of Solids and Structures, Vol. 42, pp. 2225-2241 | 2005 |

J. Kang, M. Jain, D. S. Wilkinson and J. D. Embury | "Microscopic Strain Imaging Using Scanning Electron Microscopy Topography Image Correlation at Large Strain" | J. Strain Analysis, Vol. 40, No. 8 | 2005 |

X. Duan, M. Jain, D. Metzger, J. Kang, D. S. Wilkinson and J. D. Embury | "Prediction of Shear Localization during Large Deformation of a Continuous Cast Al-Mg Sheet" | Materials Science and Engineering, A394, pp. 192-203 | 2005 |

X. Duan, M. Jain, M. Bruhis and D. S. Wilkinson | "Experimental and Numerical Study of Intense Shear Banding for Al-Alloy under Uniaxial Tension" | Advanced Materials Research, Vols. 6-8 , pp. 737-744 | 2005 |

Q. Situ, M. Bruhis, M. Jain | "Trimming of AA6111-T4 and AA5754-O Automotive Aluminum Sheet Materials" | International Journal of Forming Processes (IJFP), Vol.8, No.4 | 2005 |

J. Kang, D. S. Wilkinson, J. D. Embury, M. Jain and Armand J. Beaudoin | "Effect of Type-B Portevin-Le Chatelier Bands on the Onset of Necking in Uniaxial Tension of Strip Cast AA5754 Sheets" | Scripta Materialia, 53, 499-503 | 2005 |

J. Kang, D. S. Wilkinson, J. D. Embury and M. Jain | "Local Strain Measurement in a Strip Cast Automotive Aluminum Alloy Sheet" | SAE Transactions: Journal of Materials and Manufacturing, 114 , 156-165 | 2005 |

M. Jain, J. Allin, X. Duan and D. J. Lloyd | "Effect of Reverse Dome Stretching on Dome Height and Forming Limits of Sheet Materials" | Materials Science and Engineering, A390 (1-2), pp. 210-216 | 2005 |

P.D.Wu, S.R.MacEwen, D.J.Lloyd, M.Jain, P.Tugcu, K.W.Neale | "On Pre-straining and the Evolution of Material Anisotropy in Sheet Metals" | Plasticity | 2004 |

PD.Wu, M.Jain, J.Savoie, S.R.MacEwen, P.Tugcu, K.W.Neale | "Evaluation of Anisotropic Yield Functions for Aluminum Sheets" | Plasticity | 2003 |

D.J. Lloyd, D. Evans, C. Pelow, P. Nolan and M. Jain | "Bending in Aluminum Alloys AA6111 and AA5754 Using the Cantilever Bend Test" | Materials Science and Technology, Vol. 18, pp. 621-628 | 2002 |

H.R. Shakeri, A. Buste, M.J. Worswick, J.A. Clarke, F. Feng, M. Jain and M. Finn | "Study of Damage Initiation and Fracture in Aluminum Tailor Welded Blanks Made Via Different Welding Techniques" | Journal of Light Metals, Vol. 2, pp. 95-110 | 2002 |

H.R.Shakeri, A.Buste, M.J.Worswick, J.A.Clarke, F.Feng,M.Jain, and M.Finn | "Microstructural Study of Damage Initation and Fracture in Aluminium Tailor Welded Blanks Made Via Different Welding Techniques" | Metallurgical and Materials Transactions | 2001 |

P.D.Wu, K.Inal, K.W.Neale, L.D.Kenny, M.Jain and S.R.MacEwen | "Large Strain Behaviour of Very Thin Aluminium Sheets Under Planar Simple Shear" | J.Phys.IV France 11 | 2001 |

M.Jain | "A Simple Test to Assess the Formability of Tailor-Welded Blanks" | Inter.J.of Forming Processes, Vol.3, No.3-4, pp.185-212 | 2000 |

E.T.Harpell, M.J.Worswick, M.Finn, M.Jain, and P.Martin | "Limiting Draw Ratios of AA57554-0 Aluminium Alloy Sheet:Numerical Prediction and Validation" | J.Mater.Processing Tech., Vol.100, pp.131-141 | 2000 |

A.Buste, X.Lalbin, M.J.Worswick, J.A.Clarke, M.Finn, B.Altshuller and M.Jain | "Prediction of Strain Distribution in Aluminium Tailor Welded Blanks for Different Welding Techniques" | Canadian Metall. Quaterly (Netherlands), Vol.39, no.4, pp.493-501 | 2000 |

P.D.Wu, A.Graf, M.Jain and S.R.MacEwen | "On Alternate Representation of Forming Limits" | Key Engineering Materials, Vols.177-180, pp.517-522 | 2000 |

F.Liu, and R.Sowerby | "Detrmination of Optimum Shaped Blanks when Deep Drawing Prismatic Cups" | J.Mats.Shaping Technology, Vol.9, pp.153-159 | 1999 |

M.Jain, J.Allin and D.J.Lloyd | "Fracture Limit Prediction Using Ductile Fracture Criteria for Forming of an Automotive Aluminium Sheet" | Inter.J.Mech.Sciences, Vol.41, pp.1273-1288 | 1999 |

M.Jain, J.Allin and M.J.Bull | "Deep Drawing Characteristics of Automotive Aluminium Alloys" | Mater.Sc.Eng., A256, pp.69-82 | 1998 |

P.D.Wu, K.W.Neale, E.van der Giessen, M.Jain, A.Makinde, and S.MacEwen | "Crystal Plasticity FLD Analysis of Rolled Aluminium Sheets" | Metallurgical and Materials Transactions A, Volume 29A, pp.527-535 | 1998 |

J.Savoie, M.Jain, A.R.Carr, P.D.Wu, K.W.Neale, Y.Zhou, J.J.Jonas | "Predictions of Forming Limit Diagrams Crystal Plasticity Models" | Mater.Sc.Eng., A257, pp.128-133 | 1998 |

Y.Zhou, J.J.Jonas, L.Szabo, A.Makinde, M.Jain, and S.R.MacEwen | "Incorporation of an Anisotropic Strain-Rate Potential into Three Dimensional Finite Element Simulations" | International Journal of Plasticity, Vol.13, No.1/2, pp.165-181 | 1997 |

M.Jain, D.J.Lloyd, and S.R.MacEwen | "Hardening Laws, Surface Roughness, and Biaxial Limit Strains of Sheet Aluminium Alloys" | Int.J.Mech.Sci., Vol.38, No.2, pp.219-232 | 1996 |

H.Iseki and R.Sowerby | "Determination of the Optimum Blank Shape when Deep Drawing Nonaxisymmetric Cups, Using a Finite-Element Method" | JSME International Journal, Series A, Vol. 38, No.4, pp. 473-479 | 1995 |

M.Jain, S.R.MacEwen and L.Wu | "Finite Element Modelling of Residual Stresses and Strength-Differential Effect in Discontinuously Reinforced Metal Matrix Composites" | Material Science and Engineering A183, pp.111-120 | 1994 |

D.Lentz and R.Sowerby | "A Methodology for Hole Extraction in Sheet Metal Parts" | J.of Computer Aided Design, Vol. 26, pp. 771-783 | 1994 |

H.Iseki and R.Sowerby | "A Method for Evaluating Limiting Drawing Ratio" | J.of Materials Engineering and Performance, Vol. 2, pp. 107-112 | 1993 |

D.Lentz and R.Sowerby | "Feature Extraction of Punched Regions" | J.of Computer Aided Design, Vol. 25, pp. 421-437 | 1993 |

S.Nagaki, M.Goya, and R.Sowerby | "The Influence of Void Distribution on the Yielding of an Elastic-Plastic Porous Solid" | Int.J.Plasticity, Vol. 9, pp. 199-211 | 1993 |

M.Jain | "A TEM Study of Microstructure Development during Low Cycle Fatigue of Overaged Al-Mg-Si Alloy" | Journal of Materials Science, 27, pp.399-407 | 1992 |

X.Chen, and R.Sowerby | "The Development of Ideal Blank Shapes by the Method of Plane Stress Characteristics" | Int.J.Mech.Sci., Vol.34, pp.159-166 | 1992 |

M.Jain | "Micromechanical Stresses during Low Cycle Fatigue of Overaged Al-Mg-Si Alloy" | Fatigue and Fracture of Engineering Materials and Structures, Vol.15, No.1, pp.33-42 | 1992 |

F.Liu and R.Sowerby | "The Determination of Optimum Shaped Blanks When Deep Drawing Prismatic Cups" | J.Mats.Shaping Technology | 1992 |

S.Nagaki, R.Sowerby, and M.Goya | "An Anisotropic Yield Function for Porous Metals" | Mater.Sc.Eng., Vol.A142, pp.163-168 | 1991 |

H.Iseki, and R.Sowerby | "The Determination of Maximum Draw Depth during Deep Drawing" | AMADA Technical Journal, Vol.24, pp.1-8 | 1991 |

M.Jain, M.C.Chaturivedi, N.L.Richards, and N.C.Goel | "Strain Rate Sensitivity Effects with Forming Characteristics of Superplastic Ti-6Al-4V" | Materials Science and Engineering, A13, pp.205-211 | 1991 |

M.Jain, N.L.Richards, N.C.Goel, and M.C.Chaturivedi | "Microstructural Characteristics in Alpha Phase of Superplastically Deformed Ti-6Al-4V" | Materials Science and Engineering, A145, pp.205-214 | 1991 |

H.Iseki, and R.Sowerby | "On the Numerical Simulation of the Redrawing Ratios during the Multi-Stage Forming of Cylindrical Shells" | Int.Journal of the JSME, Vol.33, pp.202-208 | 1990 |

M.Jain | "Time and Space Dependent Development of Dislocation Densities during Unaxial Deformation" | Archives of Mechanics, Vol.2, pp.223-232 | 1990 |

M.Jain | "A Dislocation Based Analysis of Continuum Mechanical and Microscopic Local Stresses during Cyclic Deformation of Copper" | Journal of Materials Research, Vol.5, No.10, pp.2079-2093 | 1990 |

M.Jain | "A Theoretical Consideration of Dislocation Dynamics in Cell Forming FCC Metals" | Physica Status Solidi(A), 119, K107 | 1990 |

M.Jain | "Evolution of Internal Stress Variables during Cyclic Deformation of Copper" | Materials Science and Engineering, Vol.A128, pp.183-193 | 1990 |

H.Iseki, R.Sowerby, D.Bhattacharyya, and P.Gatt | "A Theoretical and Experimental Study of a Curved Strip Compressed by a Flat Plate" | Trans ASME J.Appl.Mech., Vol.56, pp.96-104 | 1989 |

R.Sowerby et.al. | "A Search for a Short Term Test to Assess the Machinability of Stinless Steels" | J.Materials Shaping Technology, Vol.7, pp.161-167 | 1989 |

H.Iseki, R.Sowerby, N.Chandrasekaran, and P.Gatt | "The Elastic-plastic Snap through of a Curved Metal Strip Compressed by a Flat Rigid Plate: The Influence of the End Support Conditions" | Int.Journal of the JSME, Vol.32, pp.101-106 | 1989 |

R.Sowerby, and N.Chandrasekaran | "A Proposal for the Onset of Chip Segmentation in Machining" | Materials Science and Engineering, Vol.A119, pp.219-229 | 1989 |

R.Sowerby and M.Karima | "A APC Based Computer Aided Analysis System for the Cup Drawing Process" | J.Mater.Shaping Technology, Vol.32, pp.113-124 | 1988 |

E.Nakamachi, and R.Sowerby | "Finite Element Modelling of Punch Stretching of Square Plates" | Trans.ASME, J.Appl.Mechs, Vol.55, pp.667-671 | 1988 |

R.Sowerby, and N.Chandrasekaran | "Application of McClintock's Ductile Fracture Model to Study the Tensile Straining of Some Sheroidized Steels under Superimposed Hydrostatic Pressure" | Mater.Sc.Eng., Vol.79, pp.15-26 | 1986 |

R.Sowerby, and N.Chandrasekaran | "The Prediction of Damage Rate in Upsetting Tests Using McClintock's Model" | Mater.Sc.Eng., Vol.79, pp.27-36 | 1986 |

R.Sowerby, J.L.Duncan, and E.Chu | "The Modelling of Sheet Metal Stampings" | Inter.J.Mech.Sci.,Vol.28, pp.415-430 | 1986 |

D.F.Watt, and M.Jain | "Effect of Martensite Morphology on the Strength Differential Effect in Dual Phase Steels" | Scripta Metallurgica, Vol.8, pp.1379 | 1984 |

R.Sowerby, I.O'Reilly, N.Chandrasekaran, and N.L.Dung | "Materials Testing for Cold Forging" | J.Engineering Materials and Technology, Vol. 106, pp. 101-106 | 1984 |

R.Sowerby and E.Chu | "Rotations, Stress Rates and Strain Measures in Homogeneous Deformation Processes" | Int.J.Solids Structures, Vol. 20, No. 11/12, pp. 1037-1048 | 1984 |

M.Hirao, J.Tlusty, R.Sowerby, and G.Chandra | "Chip Formation with Chamfered Tools" | J.Eng. Industry, Vol. 104, pp. 339-342 | 1982 |

J.L.Duncan and R.Sowerby | "Computer Aids in Sheet Metal Engineering" | Annals of the CIRP, Vol. 30/2, pp. 541-546 | 1981 |

J.D.Embury and J.L.Duncan | "Formability Maps" | Ann. Rev. Mater. Sci., pp. 505-521 | 1981 |

D.Uko, R.Sowerby, and J.D.Embury | "Bauschinger Effect in Structural Steels and Role in Fabrication of Line pipe: Part 1 Analysis of Bauschinger in Structural Steels" | Metals Technology, pp. 359-368 | 1980 |

Y.Tomita and R.Sowerby | "An Approximate Analysis for Studying the Plane Strain Deformation of Strain Rate Sensitive Materials" | Int.J.Mech.Sci., Vol. 21, pp. 505-516 | 1979 |

R.Sowerby | "New Techniques of Metal Forming" | Sci.Prog.,Oxf., 64, pp.117-147 | 1977 |

R.Sowerby and W.Johnson | "A Review of Texture and Anisotropy in Relation to Metal Forming" | Mater.Sci.Eng., 20, pp. 101-111 | 1975 |

H.Verguts and R.Sowerby | "The Pure Plastic Bending of Laminated Sheet Metals" | Int.J.Mech.Sci., 17, pp. 31-51 | 1975 |

R.Sowerby and J.L.Duncan | "Failure in Sheet Metal in Biaxial Tension" | Int.J.Mech. Sci., Vol. 13, pp. 217-229 | 1971 |